Product details

Specification:
Item Type: Generator Auto Start Control Panel
Specifications:
Power Supply: DC 8～36 V
Current Consumption: 180mA, 12V; 190mA, 24V
Voltage Input Range: AC 20～300 V, 50 Hz or 60 Hz system
Internal Programmable Control Output: Active DC, Less than or equal to 2.4 ampere
Oil Valve and Motor Control Output: Active DC, Less than or equal to 3.4 ampere
Transformer: Secondary current 5 ampere, 0.5VA
Operating Temperature Range: -20 degrees Celsius ～ 70 degrees Celsius
Product Size: Approx. 209 x 146 x 31mm / 8.2 x 5.7 x 1.2in
Installation Opening: Approx. 182 x 137mm / 7.2 x 5.4in
Control Function:
Automatic mains monitoring
Emergency stop control
Automatic control of cranking
Local manual start/stop
Remote automatic start/stop
Start the motor automatically exit control
Multiple modes of preheating control
Stop power supply control
Dual power switch switching control
Start delay control
Protective Function:
Low lubricating oil pressure
The fails to
Emergency shutdown of generator set
Generating set public alarm
Generator overvoltage, permanent voltage and overload
High cooling water temperature
Engine overclocking
Engine low frequency
Engine shutdown failed
Engine failed to start
Alarm Indication:
Corresponding alarm indication mark on the LCD screen
The public alarm light is always on for warning; flashing for alarm
Parameter Configuration:
Parameter configuration through the control panel
Parameter configuration through dedicated software
Parameter Display:
Battery voltage
Lubricating oil pressure
Running time
Generator frequency, voltage, current
Cooling water temperature

Package List:

1 x Generator Auto Start Control Panel

1 x User Manual

Note:
Please set according to the function introduction of the manual, and connect correctly according to the wiring diagram.

•

• This module is specially designed for the application scheme with the generator set as the backup power source. Can automatically monitors the state of the mains and automatically controls the start and stop of the generator set

• Indicate the current working status, related parameters, fault content, etc. by highlighting LED and LCD

• With three remote functions, parameter settings can be performed on the panel, and also support microcomputer control